Tank Trailers

Tank Trailers

The best choice for storing highly refined materials

From the pioneers of the smooth-wall, 180° round-bottom Frac Tank, Tidal Tank’s Stainless Steel Tank Trailers offer the best choice for storing highly refined materials. Our Stainless Steel Tank Trailers offer 7,000 gallons of mobile storage capacity that is easier to clean and less likely to corrode than other storage tanks. These tanks are ideal for storing de-mineralized water, highly pure materials, more corrosive materials, and highly refined products. Stainless Steel Tank Trailers offer the highest degree of protection from contamination by impurities.

7,000 Gallon, One Compartment, 316 Stainless Steel Tank Trailer

  • Dimensions: Overall: 42′ long, 11′ high; 7,000-gallon capacity
  • Manhole: 20″ diameter full opening Betts 8310-LC-W, 6-lug with white hypalon gasket in cover
  • Vents: 4″ Girard threaded pressure relief vent, 25 PSI MAWP, rated at a test pressure of 45PSI, complete with a Teflon encapsulated O-ring; 4″ Girard magnetic vacuum breaker and air inlet and gauge assembly
  • Vent line: Vent line on tank bottom, (1) 3/4″ SS vent line from spilldam to rear of tank curbside ground level with SS ball valve and male camlock fitting
  • Thermometer: 0-250°F clip-on type, located curbside eye level near center of tank, rear level gauge with digital readout and probe thermometer
  • Hose carrier: (2) 8″x21′ aluminum hose tubes, mount one each side
  • Outlet valve: 3″ SS QRB Hydrolet valve with 90° threaded outlet (Betts QR 713 SS-T)
  • Cleanouts: (2) 3″ threaded nozzles in tank shell on top centerline, locate max. 6′ from head seams with solid caps
  • Heat: Full length T304SS channels, 150PSI design working pressure, designed for steam and intrinsic heat
  • Ladder: SS 18″ wide with dimpled channel rungs, side handrails, platform type top step, located curbside
  • Construction: Req. 5, Straight round, T316LSS-2B finish on shell and heads. D.O.T. overturn protection at ends of spilldam and beyond each cleanout. 6″ fiberglass insulation compressed to 5″